Problem scanner on the Epson Stylus TX111

Printer Epson Stylus TX111 is a multifunction printer is a printer that can scan, print and copy documents. This printer has an effective resolution of 5760 x 1440 dpi with Variable Sized Droplet Technology where Black Print Speed​​: 30 ppm Print Speed ​​Color: 15 ppm. 

Because of so-called multifunction printers, this printer has a scanner Sensor Type CIS technology which scanner resolution is 600 x 1200 DPI, 48 input bits, 24 bits output Optical Resolution.

Maybe a little bit that I described about Epson Stylus TX111 Printer specifications, but this time Sefendi Blog will explain the problem scanners Epson Stylus TX111 Printer. Problem scanner in Epson Stylus TX111 printer actually happened a long time and much discussion on the internet. Printer Epson Stylus TX111 scanner error, after push power on it sound not good on scanner, and motor of scanner lamp will not stop. After proccesing the motor stop but all off the lamp blink.

In my experience the problem scanner Epson Stylus TX111 printer there are two kinds of problems.

1. Scanner error on printer Epson Stylus TX111 is indicated as error problem above, when the printer is turned on loud noise will appear on the scanner and the CIS scanner motor does not stop. But after Sanner CIS motor stops, the printer indication will blink.
2. There is also a problem on the scanner Epson Printer TX111 where problems are indicated as follows: When the printer is in use for the scan, the scan results appear or appear black block results less than 3 centimeters wide and a block in the scans is black.

How do I fix the scanner Epson Stylus TX111 is the problem?

For the first problem, we must first check scanner cable. Because the scanners sound problem could be due to a faulty scanner cable. Damage to the cable scanner can check the physical condition of the scanner cable. Other causes could be in because CIS scanner problem, for CIS which I have not been able to check the problem in detail. Most likely the problem is caused because the scanner noise problems CIS scanner.

For the second problem, surely due CIC light scanner problem. So that when the printer is in use to scan, the scan results appear black block. Hopefully this article can be made by reference to all readers.